Dell 3110CN Owner's Manual

Also see for Colour Laser Printer 3110cn: User guide Features list Service manual

Contents

38 Setting up Network Printingc. Select the Wireless Network tab.d. Make sure the check box for Use Windows to configure my wireless network settings ischecked.e. Click Advanced.f. Do either of the following:When wireless ad-hoc mode is set to the printer:Select Computer to Computer (ad hoc) networks only and close the Advanced dialogbox.When wireless infrastructure mode is set to the printer:Select Access point (Infrastructure) networks only and close the Advanced dialog box.g. Click Add to display Wireless network properties.h. Enter the setting that you send to printer and click OK.i. Click Move up to move the setting to the top of the list.j. Click OK to close the Property dialog box.11. On the Setting-Ready Printer screen, verify that the correct IP address is assigned to theprinter to which the wireless setting is set, and then click Install.12. If you select the I am setting up this printer on server check box on the Select Printer screenand also select the PostScript Driver check box on the Enter Printer Settings screen, theAdobe Systems Inc. License Agreement screen appears. Select the I accept the terms of thelicense agreement option button, and then click Install.13. On the Congratulations! screen, click Finish to complete the installation. A test page will beprinted with the installed printer by clicking the Print Test Page button.Use the Dell Printer Configuration Web Tool to monitor the status of your network printerwithout leaving your desk. You can view and/or change the printer configuration settings, monitortoner level, and when it is time to order replacement consumables, just click the Dell supplies linkright from your Web browser.NOTE: The Dell Printer Configuration Web Tool is not available when the printer is locally attached to acomputer or a print server.Wireless Installation using Dell Printer Configuration Web ToolScene 1. Install a printer to the already-operating wireless network (When wireless setting is alreadyset to your computer)For DHCP network:1. Create wireless setting of your computer following the steps below.a. Select Network Connections from Control Panel.