Using Your Printer 576Using Your PrinterChanging Printer SettingsNOTE: For detailed explanations of the menus, see the User’s Guide.You can select menu items and corresponding values from the operator panel. When you first enterthe printer menus from the operator panel, you see an asterisk (*) next to a value in the menus.This asterisk indicates the factory default menu setting. These settings are the original printersettings. (Factory defaults may vary for different countries.) When you select a new setting fromthe operator panel, an asterisk appears next to the setting to identify it as the current user defaultmenu setting. These settings are active until new ones are selected or the factory defaults arerestored. To select a new value as a setting:1. Press Menu.2. Press or until the required menu appears, and then press .3. Press or until the desired menu or menu item appears, and then press .• If the selection is a menu, the menu is opened and the first printer setting in the menuappears.• If the selection is a menu item, the default setting for the menu item appears. (Thecurrent user default menu setting has an asterisk (*) beside it.)Each menu item has a list of values for the menu item. A value can be:• A phrase or word to describe a setting• A numerical value that can be changed• An On or Off setting• Press and at the same time. This will recover the factory default menu settings.4. Press or to scroll until the desired value appears.5. Press .This enables the setting value, which is indicated by an asterisk (*) next to the setting value.6. Press Cancel to return to the previous menu.