48 Setting up Network Printinge. Select Get IP Address.f. Select Panel.g. Scroll back to IP Address.h. Manually enter the IP address using the directional buttons on the control panel andpress enter button.e.g.: 192.168.1.2i. Scroll back to Subnet Mask.j. Manually enter the subnet mask address using the directional buttons on the controlpanel and press enter button.k. Scroll back to Gateway Address.l. Manually enter the gateway address using the directional buttons on the control paneland press the Enter button.m. Restart the printer.5. Open Dell Printer Configuration Web Tool using the WEB browser.e.g.: http://:192.168.1.26. Change wireless settings of the printer from Dell Printer Configuration Web Tool.a. Click Print server setting on the left navigational bar.b. Click Print server setting tab.c. Click Wireless LAN sub-tab.d. Change the SSID setting (according to your access point SSID) and change Networktype to Infrastructure.e. Click the Restart printer to apply new settings button.7. Restore the previous wireless settings for your computer.a. Select Network Connections from Control Panel.b. Right-click Wireless Network Connection and select Properties.c. Select Wireless Network tab.d. Click Advanced.e. Do either of the following:When wireless ad-hoc mode is set to the printer:Select Computer to Computer (ad hoc) networks only and close the Advanced dialogbox.When wireless infrastructure mode is set to the printer:Select Access point (Infrastructure) networks only and close the Advanced dialog box.f. Select the setting that you send to the printer in the list in Preferred Network group.
