0*Apply New Settings After you complete the settings, press the Apply New Settings button to apply thechanges.Restart printer to apply newsettings Press the Restart printer to apply new settings button to apply the changes.Adjust AltitudePurpose:To specify the altitude of the location where the printer is installed.The discharge phenomenon for charging the photo conductor varies with barometric pressure. Adjustments are performedby specifying the altitude of the location where the printer is being used.Values:0 meter*Specifies the altitude of the location where the printer is installed.1000 meters2000 meters3000 metersApply New Settings After you complete the settings, press the Apply New Settings button to applythe changes.Restart printer to apply newsettings Press the Restart printer to apply new settings button to apply the changes.Reset DefaultsPurpose:To initialize the NV (nonvolatile) memory for system parameters. After executing this function to automatically restart theprinter, the menu parameters, or data are reset to their default values.Values:Start Initializes system parameters.Non-Dell TonerWhen Non-Dell print cartridge is used, the printer may be severely damaged and may not be covered by your warranty.Purpose:To specify whether or not to use another manufacturer's print cartridge.Values:Non-Dell Toner Off* Disables the use of another manufacturer's print cartridge.On Enables the use of another manufacturer's print cartridge.Apply New Settings After you complete the settings, press the Apply New Settings button to applythe changes.Restart printer to apply newsettings Press the Restart printer to apply new settings button to apply the changes.Initialize PrintMeter
