When an unacceptable character is specified for job owner name, "Unknown User" is used as job ownername.NOTE: Characters acceptable for job owner name are alphanumeric characters and symbols, except for space andcolon.NOTE: Up to 32 characters are acceptable for job owner name.When an unacceptable character is specified for password, or when a specified password is not withinthe range of the allowable character length, the authentication password is treated as not specified.NOTE: Acceptable password length is between 4 and 12 characters.Incomplete form of -Jown option is treated as no authentication setting being made. In such case, if authenticationsetting is made with the environmental variable, it is used as setting information.ExampleTo convert the XWD image into the PostScript language program and output it to a file, type as follows.% xwd2ps2 file.xwd > file.psTo output the XWD image to a printer, type as follows.% xwd2ps2 file.xwd | lpImportantWhen -s and -S are specified at the same time or when the same option is specified twice, the later setting willprevail.When the output size option (-s, -S) is not specified, scaling will be executed taking one pixel of the TIFF data asone pixel of the printer.If the print position option (-lleft bottom) specifies a point beyond the printable area of the printer, data beyondthe printable area will not be printed.Precautions and LimitationsDuring InstallationPay attention to the following points during the installation.SolarisUse lpadmin command to register the default printer.# lpadmin -d PrinterNameTo inhibit the banner sheets output, change the value of nobanner=no to nobanner=yes that includes in the filecorresponding to the printer name in /etc/lp/interfaces/.The printer registered by UX filter must not be changed by admintool.When Content types: postscript is displayed by typing lpstat -p printername -l, it's necessary to deletethe printer and reinstall.
