Action Yes No1The print media surface may be uneven. Try changing the Paper Type setting in the printerdriver. For example, change the plain paper to thick.1. On the Paper/Output tab, change the Paper Type setting.Is the problem recovered?The task iscomplete.Go toaction 2.2Verify that the correct print media is being used. See "Supported Paper Sizes". If not, usethe print media recommended for the printer.Is the problem recovered?The task iscomplete.Go toaction 3.3Replace the fuser if you have a spare.1. Replace the fuser. See "Replacing the Fuser".2. After you replace the fuser, test print your document again.Is the problem recovered?The task iscomplete.ContactDell.Random spots/blurred imagesAction Yes No1Ensure that the print cartridges are installed correctly. See "Installing the PrintCartridges".Is the problem recovered?The task iscomplete.Go toaction 2.2Replace the print cartridge if you have a spare.1. Replace the print cartridge. See "Installing the Print Cartridges" and"Replacing Print Cartridges".2. After you replace the print cartridge, click Chart Print on the Diagnosis tab.3. Click the Pitch Configuration Chart button.The Pitch Configuration Chart is printed.Is the problem recovered?The task iscomplete.ContactDell.The entire output is blank.
