2. To print photos it is recommended that you use both a colour cartridge and a photo cartridge. For more information, see"Replacing Ink Cartridges".3. On your computer, open the document to print and click Fileg Print.4. Click Preferences, Properties, Options or Setup (depending on your program or operating system) to customise theprint settings.The Printing Preferences dialogue box opens.5. In the Paper/Quality tab, select Photo paper and Photo quality.6. Select the Borderless check box, the orientation you want for your photos and the number of copies.7. In Paper/Quality, select the borderless paper format from the pull-down list and click OK.8. Depending on your program or operating system, click OK or Print.Printing Envelopes1. Switch on the computer and the printer and ensure that they are connected together.2. Load up to 10 envelopes into the feeder, ensuring that the stamp is in the upper left corner.NOTE: You can load a single envelope into the paper support without needing to remove the blank paper.3. On your computer, open the document to print and click Fileg Print.4. Depending on the program or operating system you are using, click on Preferences, Properties, Options or Settings.The Printing Preferences dialogue box opens.5. In the Paper/Quality tab, select the quality, print speed, paper size, black and white or colour printing, orientation