photo you want to define, then press Select . The photo is highlighted by a yellow frame to indicate that it is selected.3. Press the Menu button to display the Options menu.4. Now, using the Arrow buttons highlight Settings and press Select .5. Highlight the option you want to set using the Arrow buttons and press Select .6. For each option, you can scroll through the values available using the Arrow buttons . Press Select when thevalue you want is displayed. The values available are described below.7. To save your settings and exit press . If you want to exit without saving, press the Cancel button and confirmwhen prompted.Settings Menu Item SettingsBorderBorderBorderlessLayout1 x page4 x page9 x page16 x pageQualityNormalPhotoDraftPaper TypePlainCoatedPhotoTransparencyViewing or Printing Photos1. In Photo mode on the operator panel, use the Arrow buttons to highlight Browse then press the Select button.2. Press the Arrow buttons to scroll through the photos on the memory card or USB memory pen.3. Press the Select button to select a photo you want to print.4. Press the Arrow buttons to select the number of copies.5. Press the Start button to start printing.NOTE: Only images in JPEG format or certain TIFF formats can be printed directly from the memory card or the USBmemory pen. To print photos in other formats, you must first transfer them to the computer.