Dell 928 User Manual

Dell 928 User Manual Manual pdf 6 page image

Number Part Description1 Paper feeder Part that supports the loaded paper.2 Paper guide Guide that helps the paper feed into the printer properly.3 Top cover Upper cover of printer that holds your document or photograph in place while you scan it.4 Paper outputtrayTray that holds the paper output by the printer.NOTE: To extend the paper output tray, pull the tray out and flip out the extender.5 Scanner unit Unit you lift to gain access to the ink cartridges.6Ink cartridgestoragegarageUnit you use to store an unused black or photo ink cartridge.7 Ink cartridgecarrierCarrier that holds two ink cartridges, one colour and the other black or photo. For more information onyour cartridges, see "Replacing Ink Cartridges".8 ScannersupportPart under the scanner unit that keeps the printer open while you change ink cartridges.NOTE: To close the printer and resume normal operations, lift the scanner unit, push the scannersupport towards the front of the printer, then lower the scanner unit until it rests on the main body of theprinter.9 PowerconnectorSlot into which you plug the power cable.NOTE: Insert the power cable into the printer before connecting the power cable to the wall socket.10 USBconnectorSlot into which you plug the USB cable (sold separately). The other end of the USB cable is connectedto your computer.11 Memory cardslots Slots for inserting media cards containing digital pictures.12USB port orPictBridgeportSlot for plugging a USB memory pen or USB cable (sold separately) that connects your printer to aPictBridge-enabled camera. For more information, see "Printing Photos from a PictBridge-EnabledCamera".13 Scannerglass Surface on which to place your document or photo face downwards for copying or scanning.14 OperatorpanelPanel on the printer for controlling copying, printing and scanning. For more information, see "Using theOperator Panel".Setting Up Your PrinterNOTE: The following operating systems are supported: Windows 2000 with Service Pack 4, 32-bit Windows XP with ServicePack 2, 64-bit Windows XP with Service Pack 1, 32-bit Windows Vista™ and 64-bit Windows Vista™.Follow the instructions in the Setting Up Your Printer diagram to install the hardware and software. If you encounterproblems, see "Installation Problems".Setting the LanguageFollow these instructions to set the language on your printer:1. When you first power on your printer, press the Arrow buttons on the operator panel to highlight the Setup optionin the Main menu, then press the Select button . The Setup sub menu is displayed.2. Press the Arrow buttons to highlight Language.