Size WarningThe size of the paperinserted is less than thatselected.Press Select to continueor press Cancel to goback and retry operation.The size of the paper in the printer is less than thatselected.Modify the paper size so that it correspondswith the size of the paper loaded in the printer,or press the Select button to continueprinting.Ink level errorThe cartridge is low on ink. This type of message isdisplayed when the level of ink remaining in thecartridges reaches: 15 percent, 10 percent and 5percent.Replace the ink cartridge. For moreinformation, see "Replacing Ink Cartridges".Only one peripheral ormemory card allowed.Remove all the others.More than one memory card or memory device hasbeen inserted into the printer. Remove all the memory cards or devices.Improving Print QualityIf the print quality of the documents is not satisfactory, there are various ways of improving it.Use an appropriate type of paper. For example, if you are printing photos using a photo cartridge, use Dell Premium photopaper.Use thicker, white or coated paper. For printing photos, use Dell Premium photo paper.Select a higher print quality level.If there is no improvement in print quality, try:Cleaning the ink cartridges. For more details see "Cleaning the Ink Cartridge Nozzles".Aligning the ink cartridges. For more details see "Aligning Ink Cartridges".Setting a higher print quality level.Setting a Higher Print Quality LevelTo select a higher print quality level:1. With the document open, click on Fileg PrintThe Print dialogue is displayed.2. Depending on the program or operating system you are using, click on Preferences, Properties or Options.3. In the Paper/Quality tab, select the highest quality level.4. Print the document again.For more solutions, visit the Dell support web site at support.dell.com.Error Messages ListingThe following table describes the possible error messages that can appear on the printer display or on the computerscreen.Error Code Operator DisplayMessage Description Solution302 Memory Error. Call Dell. Error detected in reading or writing NVRAM. Call the Dell Support Center.