161. IntroductionControl panel overviewThis control panel may differ from your machine depending on its model.There are various types of control panels.1 Toner LED Shows the status of the toner (see "Status LED" onpage 53).2 Status LED Shows the status of your machine (see "Status LED"on page 53).3 WPS(B1160wonly)Configures the wireless network connection easilywithout a computer (see "Wireless network setup"on page 83).• Prints configuration sheet- Press and hold this button for about 10seconds until the green LED blinks slowly, andrelease.• Prints supplies info report / error report- Press and hold this button for about 15seconds until the green LED on, and release.• Prints manual- Press this button each time you load a sheet ofpaper in the tray if you have selected ManualFeeder for Source in your printer driver.3 Info (B1160only)• Prints configuration sheet- Press and hold this button for about 10seconds until the green LED blinks slowly, andrelease.• Prints supplies info report / error report- Press and hold this button for about 15seconds until the green LED on, and release.• Prints manual- Press this button each time you load a sheet ofpaper in the tray if you have selected ManualFeeder for Source in your printer driver.4 Power/Cancel• You can turn the power off or wake the machineup from the sleep mode with this button.• Stops an operation at any time