Dell B1160 User Manual

Also see for B1160: Quick manual Product information guide

Contents

Wireless network setup902. Using a Network-Connected Machine (B1160w only)8 The window shows the wireless network settings and checks if thesettings are correct. Click Next.• For the DHCP methodIf the IP address assignment method is DHCP, check if DHCP is shownin the window. If it shows Static, click Change TCP/IP to change theassignment method to DHCP.• For the Static methodIf the IP address assignment method is Static, check if Static is shownin the window. If it shows DHCP, click Change TCP/IP to enter the IPaddress and other network configuration values for the machine.Before entering the IP address for the machine, you must know thecomputer’s network configuration information. If the computer isset to DHCP, you must contact the network administrator to get thestatic IP address.For example:If the computer’s network information is as shown below:- IP address: 169.254.133.42- Subnet Mask: 255.255.0.0Then, the machine’s network information should be as follows:- IP address: 169.254.133.43- Subnet Mask: 255.255.0.0 (Use the computer’s subnet mask.)- Gateway: 169.254.133.19 When the wireless network setting is completed, disconnect the USBcable between the computer and machine. Click Next.10 The Wireless Network Setting Complete window appears.Select Yes if you accept the current settings and continue the setupprocedure.Select No if you want to return to the beginning screen.Then, click Next.11 Click Next when the Confirm Printer Connection window appears.12 Select the components to be installed. Click Next.13 After selecting the components, you can also change the machine name,set the machine to be shared on the network, set the machine as thedefault machine, and change the port name of each machine. Click Next.14 After the installation is finished, a window asking you to print a test pageappears. If you want to print a test page, click Print a test page.Otherwise, just click Next and go to step 16.15 If the test page prints out correctly, click Yes.If not, click No to reprint it.16 Click Finish.