181. IntroductionInstalling the driver locallyA locally connected machine is a machine directly attached to your computerusing the cable.• If you are a Macintosh or Linux OS user, refer to the "SoftwareInstallation" on page 70.• The installation window in this User’s Guide may differ depending on themachine and interface in use.• Selecting Custom Installation allows you to choose which programs toinstall.• Only use a USB cable no longer than 3 meters (118 inches).12Windows1 Make sure that the machine is connected to your computer andpowered on.If the “Found New Hardware Wizard” appears during the installationprocedure, click Cancel to close the window.2 Insert the supplied software CD into your CD-ROM drive.The software CD should automatically run and an installation windowwill appear.If the installation window does not appear, click Start > All programs >Accessories > Run.X:\Setup.exe replacing “X” with the letter, which represents your CD-ROM drive and click OK.3 Select Next.Your printer driver installation window that appears in this User’s Guide maydiffer depending on the printer in use.
