Wireless network setupCanceling the connection processTo cancel the wireless network connection when the machine is connecting tothe wireless network, press and release the (power/cancel) button on thecontrol panel. You need to wait 2 minutes to re-connect to the wirelessnetwork.Disconnecting from a networkTo disconnect the wireless network connection, press the (WPS) button onthe control panel for more than two seconds.• When the Wi-Fi network is in idle mode: The machine is immediatelydisconnected from the wireless network and the WPS LED turns off.• When the Wi-Fi network is being used: While the machine waits until thecurrent job is finished, the light blinks fast on the WPS LED. Then, thewireless network connection is automatically disconnected and the WPSLED turns off.18Setup using WindowsDell Printer Easy Wi-Fi InstallBefore Using Dell Printer Easy Wi-Fi Install, please ensure that OS of yourcomputer should be Windows 7 and above.• Items to prepare- Access point- Wireless network-connected computer- Software CD that was provided with your machineTurn on your computer, access point and machine.1Connect your computer to the wireless network.2Insert the supplied software CD into your CD/DVD drive.3 The software CD should automatically run and an installation windowwill appear.If the installation window does not appear, click Start > All programs >Accessories > Run.X:\Setup.exe replacing “X” with the letter, which represents your CD/DVD drive and click OK.2. Using a Network-Connected Machine 156
