141Installing the driver locallyA locally connected machine is a machine directly attached to your computerusing the cable. If your machine is attached to a network, skip the followingsteps below and go on to installing a network connected machine’s driver (see"Installing driver over the network" on page 138).• If you are a Mac, Linux, or Unix OS user, refer to the "Software Installation"on page 128.• The installation window in this User’s Guide may differ depending on themachine and interface in use.• Only use a USB cable no longer than 3 meters (118 inches).WindowsMake sure that the machine is connected to your computer andpowered on.If the “Found New Hardware Wizard” appears during the installationprocedure, click Cancel to close the window.Insert the supplied software CD into your CD/DVD drive.The software CD should automatically run and an installation windowwill appear.If the installation window does not appear, click Start > All programs >Accessories > Run.X:\Setup.exe replacing “X” with the letter, which represents your CD/DVD drive and click OK.• For Windows 8,If the installation window does not appear, from Charms, selectSearch > Apps and search for Run. Type in X:\Setup.exe, replacing“X” with the letter that represents your CD/DVD drive and click OK.If “Tap to choose what happens with this disc.” pop-up windowappears, click the window and select Run Setup.exe.Select New Printer.31. Introduction 232
