Wireless network setupWhen the wireless network setting is completed, disconnect the USB9 cable between the computer and machine. Click Next.Click Next when the Install Printer Driver window appear.10After the installation is finished, a window asking you to print a test page11 appears. If you want to print a test page, click Print a test page.Otherwise, just click Next and go to step 16.If the test page prints out correctly, click Yes.12 If not, click No to reprint it.Click Finish.13Ad hoc via USB cable in WindowsIf you do not have an access point (AP), you may still connect the machinewirelessly to your computer by setting up an ad-hoc wireless network byfollowing the simple steps below.• Items to prepare- Network-connected computer- Software CD that was provided with your machine- The machine installed with a wireless network interface- USB cableCheck whether the USB cable is connected to the machine.1Turn on your computer and the wireless network machine.2Insert the supplied software CD into your CD/DVD drive.3 The software CD should automatically run and an installation windowwill appear.If the installation window does not appear, click Start > All programs >Accessories > Run.X:\Setup.exe replacing “X” with the letter, which represents your CD/DVD drive and click OK.Click New Printer .42. Using a Network-Connected Machine 162
