Print Media Guidelines 205Selecting Preprinted Media and LetterheadWhen selecting preprinted media and letterhead paper for the printer:• Use grain long paper for best results.• Use only forms and letterhead printed using an offset lithographic or engraved printing process.• Select paper that absorb ink, but do not bleed.• Avoid paper with rough or heavily textured surfaces.• Use paper printed with heat-resistant inks designed for use in xerographic copying machines. The ink mustwithstand temperatures of 225°C (437°F) without melting or releasing hazardous emissions.• Use inks that are not affected by the resin in toner or the silicone in the fusing unit. Inks that are oxidation-set oroil-based should meet these requirements; latex inks might not. If you are in doubt, contact your paper supplier.Printing on LetterheadCheck with the manufacturer or vendor to determine whether the pre-printed letterhead you have selected isacceptable for laser printers.Page orientation is important when printing on letterhead. Use the following illustration for help when loadingletterhead in the print media sources.Loading LetterheadLoad the letterhead in the printer with the print side facing up. Ensure that the title on the letterhead enters theprinter first.Multipurpose Feeder (MPF) Priority Sheet Inserter (PSI)
