Troubleshooting 345GhostingAction Yes No1 Adjust the transfer bias.a Launch the Tool Box, and click Chart Print on the Diagnosis tab.b Click Ghost Configuration Chart.The ghost configuration chart is printed.c Launch the Tool Box, and click Transfer Roller Refresh Mode on thePrinter Maintenance tab.d Check the check box next to On, and then click Apply New Settings.e Click Chart Print on the Diagnosis tab.f Click Ghost Configuration Chart.The ghost configuration chart is printed.Is the problem recovered?The task is complete. Go to action 2.2 The print media surface may be uneven. Try changing the Paper Typesetting in the printer driver. For example, change the plain paper tothick.a On the Paper/Output tab in Printing Preferences of the printerdriver, change the Paper Type setting.Is the problem recovered?The task is complete. Go to action 3.3 Adjust the fusing unit temperature.a Launch the Tool Box, and click Adjust Fusing Unit on the PrinterMaintenance tab.b Adjust the fixing temperature by turning up the value for yourprinting media.c Click Apply New Settings.d Click close box to exit Tool Box.Is the problem recovered?The task is complete. Go to action 4.4 If you use non-recommended print media, use the print mediarecommended for the printer.Is the problem recovered?The task is complete. Contact Dell.
