Text Box DescriptionEmail Subject Enter a subject for the email template. It is used to define the subject of theemail notification template; for example, - .Email Enter information for the body of the template that describes the event, whenit occurred, and the severity.4. Click Send Test Email perform the following:.a. In the Send Test Email dialog box, enter a destination email address for the test message and clickSend.b. If the test message fails, exit the error dialog box and the Send Test Email dialog box, click OK tosave the current email template settings, and modify your email server settings, see ConfiguringAn Email Server And Email Notification Template. Ensure you reenter the password for that emailaccount. Save the settings and then return to step 4.c. Click OK to confirm.d. Verify the test email message was sent.e. Return to the Edit Email Notification Configuration dialog box, click OK to close the dialog boxand save your settings.Configuring repetition reductionTo configure repetition reduction:1. From the Core Console, click Configuration ā Events.2. From the Repetition Reduction section, click Change.The Enable Repetition Reduction dialog box appears.3. Select Enable Repetition Reduction.4. In the Store events for text box, enter the number of minutes to store the events for repetitionreduction.5. Click OK.Configuring Event RetentionTo configure event retention:1. From the Core Console, click Configuration ā Settings.2. Under Database Connection Settings, click change.The Database Connection Settings dialog box appears.3. In the Retain event and job history for text box, enter the number of days that you want to retaininformation about events.For example, you could select 30 days(default).4. Click Save.Managing repositoriesA repository stores the snapshots that are captured from your protected workstations and servers. Therepository for your DL1000 is pre-configured. The repository resides on the internal storage of yoursystem.24
