Dell DL1000 User Manual

Also see for DL1000: Owner's manual Deployment guide

Contents

Dell DL1000 User Manual Manual pdf 36 page image

Text Box DescriptionPassphrase Enter the passphrase used to control access.ConfirmPassphraseRe-enter the passphrase you just entered.16. Click Finish to save and apply your settings.The first time protection is added for a machine, a base image (that is, a snapshot of all the data inthe protected volumes) will transfer to the repository on the Core following the schedule youdefined, unless you specified to initially pause protection.Pausing and resuming protectionWhen you pause protection, you temporarily stop all transfers of data from the current machine.To pause protection:1. In the Core Console, click the Protected Machines drop-down menu in the left navigation area.2. Select Pause Protection for the machine for which you want to pause protection.The Pause Protection dialog box appears.3. Select one of the following and click OK.• If you want to pause protection until you explicitly resume it, select Pause until resumed.• If you want to pause protection for a specified period, select Pause for and then, in the Days,Hours, and Minutes controls, type or select the appropriate pause period as appropriate.NOTE: To resume protection select Resume Protection from the Protected Machines dropdown menu.Deploying the Agent Software when protecting an agentYou can download and deploy agents during the process of adding an agent for protection.NOTE: This procedure is not required if you have already installed the Agent software on a machinethat you want to protect.To deploy agents during the process of adding an agent for protection:1. Click Protected Machines on the left navigation pane.2. Click Actions → Deploy Agent.The Deploy Agent dialog box appears.3. Enter logon and protection settings as follows:• Host name — Specifies the host name or IP address of the machine that you want to protect.• User name — Specifies the user name used to connect to this machine; for example,administrator.• Password — Specifies the password used to connect to this machine.• Protect machine after install — Selecting this option enables AppAssure to take a base snapshotof the data after you add the machine for protection. This option is selected by default. If youdeselect this option, then you must force a snapshot manually when you are ready to start dataprotection.• Display name — Specifies a name for the machine which appears on the Core Console. Thedisplay name could be the same value as the host name.36