Dell DL1000 User Manual

Also see for DL1000: Owner's manual Deployment guide

Contents

Dell DL1000 User Manual Manual pdf 87 page image

Text Box DescriptionRemoteRepositoryThe name of the desired repository on the target core in which to store thereplicated data from this machine.Pause Select this check box if you want to pause replication; for example, to pause ituntil after AppAssure takes a base image of the new agent.Schedule Select one of the following options:• Protect all volumes with default schedule• Protect specific volumes with custom scheduleNOTE: The default schedule is every 15 minutes.Initially pauseprotectionSelect this check box if you want to pause protection; for example, to preventAppAssure from taking the base image until after peak usage hours.6. Click Protect.Replicating agent data on a machineReplication is the relationship between the target and source cores in the same site, or across two siteswith slow link on a per agent basis. When replication is set up between two cores, the source coreasynchronously transmits the incremental snapshot data of select agents to the target or source core.Outbound replication can be configured to a Managed Service Provider providing off-site backup anddisaster recovery service or to a self-managed core. To replicate agent data on a machine:1. From the Core Console, click the Machines tab.2. Select the machine that you want to replicate.3. In the Actions drop-down menu, click Replication, and then complete one of the following options:• If you are setting up replication, click Enable.• If you already have an existing Replication set up, click Copy.The Enable Replications dialog box appears.4. In the Host text box, enter a host name.5. Under Agents, select the machine that has the agent and data that you want to replicate.6. If needed, select the check box Use a seed drive to perform initial transfer.7. Click Add.8. To pause or resume the replication, click Replication in the Actions drop-down menu, and then clickPause or Resume as needed.Setting replication priority for an agentTo set replication priority for an agent:1. From the Core Console, select the protected machine for which you want to set replication priority,and click the Configuration tab.2. Click Select Transfer Settings, and then use the Priority drop-down list to select one of thefollowing options:• Default• Highest• Lowest87