Dell Dimension 9200C Service Manual

Also see for Dimension 9200C: Owner's manual Owner's manual

Contents

System Setup: Dell Dimension 9200C Service Manualfile:///T|/htdocs/systems/dim9200C/en/SM_EN/syssetup.htm[10/31/2012 8:07:30 AM]NOTICE: The password jumper plug must be reinstalled on the password jumper pins in order to enable the passwordfeature.4. Remove the jumper plug from the CLRCMOS jumper pins and place it back on the password jumper pins.5. Replace the computer cover (see Replacing the Computer Cover).NOTICE: To connect a network cable, first plug the cable into the network wall jack and then plug it into the computer.6. Connect your computer and devices to electrical outlets, and then turn them on.Flashing the BIOSThe BIOS may require flashing when an update is available or when replacing the system board.1. Turn on the computer.2. Locate the BIOS update file for your computer at support.dell.com.3. Click Download Now to download the file.4. If the Export Compliance Disclaimer window appears, click Yes, I Accept this Agreement.The File Download window appears.5. Click Save this program to disk, and then click OK.The Save In window appears.6. Click the down arrow to view the Save In menu, select Desktop, and then click Save.The file downloads to your desktop.7. Click Close when the Download Complete window appears.The file icon appears on your desktop and is titled the same as the download BIOS update file.8. Double-click the file icon on the desktop and follow the on-screen instructions.Back to Contents Page