Appendix 119System SetupOverviewUse system setup as follows:• To change the system configuration information after you add, change, or remove anyhardware in your computer• To set or change a user-selectable option such as the user password• To read the current amount of memory or set the type of hard drive installedBefore you use system setup, it is recommended that you write down the system setup screeninformation for future reference.NOTICE: Unless you are an expert computer user, do not change the settings for this program. Certainchanges can make your computer work incorrectly.EnvironmentalTemperature:Operating 10° to 35°C (50° to 95°F)Storage –40° to 65°C (–40° to 149°F)Relative humidity 20% to 80% (noncondensing)Maximum vibration:Operating 0.25 G at 3 to 200 Hz at 0.5 octave/minStorage 0.5 G at 3 to 200 Hz at 1 octave/minMaximum shock:Operating bottom half-sine pulse with a change in velocity of 20 inches/sec(50.8 cm/sec)Storage 27-G faired square wave with a velocity change of 200 inches/sec(508 cm/sec)Altitude:Operating –15.2 to 3048 m (–50 to 10,000 ft)Storage –15.2 to 10,668 m (–50 to 35,000 ft)
