Dell EMC ScaleIO Ready Node 14G Manual

Also see for EMC ScaleIO Ready Node 14G: Manual Manual Hardware installation guide Inspection Guide

2. Unzip the file to a local directory on the system.3. Upload the VIB to the ESXi host's datastore.4. Log in to the vCenter via the vSphere Web Client.5. For each guest operating system, select the guest OS, and from the Actions >Power menu, select Shut Down Guest OS.6. When all the guest operating systems are powered off, right-click the ESXi hostand select Enter Maintenance Mode.7. Establish an SSH connection to the ESXi host and log in using the rootusername and password.8. Install the iSM software:esxcli software vib install - d /vmfs/volumes/datastore/ Service Module file>The command output tells you whether the installation succeeded.9. Right-click the ESXi host and select Power > Reboot.10. From the iDRAC web interface, open the iDRAC settings > Overview page andensure that the iDRAC Service Module status is RunningInstall the iSM using the vSphere CLIInstall the iDRAC Service Module (iSM) software on the ESXi host using the vSphereCLI.Procedure1. Download the ISM-Dell-Web-3.0.1-.VIB-i.zip filefrom http://www.dell.com/support/home/us/en/19/drivers/driversdetails?driverId=G0XDV%20.2. Unzip the file to a local directory on the system.3. Log in to the vCenter via the vSphere Web Client.4. For each guest operating system, select the guest OS, and from the Actions >Power menu, select Shut Down Guest OS.5. When all the guest operating systems are powered off, right-click the ESXi hostand select Enter Maintenance Mode.6. If you are using the vSphere CLI from a Windows server, navigate to thedirectory where you have installed the vSphere CLI utilities.NoteIf you are using the vSphere CLI on a Linux server, perform the command fromany directory.7. Install the iSM software:esxcli --server software vib install - d /var/log/vmware/ Service Module file>8. At the prompt, type the root username and password of the ESXi host.Reference MaterialInstall the iSM using the vSphere CLI 67