Dell EMC ScaleIO Ready Node 14G Manual

Also see for EMC ScaleIO Ready Node 14G: Manual Manual Hardware installation guide Inspection Guide

Procedure1. Configure a laptop or server with access to the iDRAC network.2. Install the Dell DRAC tools, including RACADM:a. In any Internet browser, go to the RACADM Command Line Interface forDRAC page in the Dell Systems Management wiki.b. Follow the instructions for downloading and installing Remote RACADM foryour operating system.3. Download the ScaleIO Ready Node Hardware Update Bootable ISO from theScaleIO Ready Node page and make it accessible on the network share folder.4. Create a CIFS or NFS network share that includes the Hardware ISO. The sharewill need to be accessible to the iDRAC network.Refer to OS vendor guidelines for instructions on how to create CIFS(windows) or NFS (Linux or XenServer) shares5. Open a terminal/command prompt with superuser/administrator accessibility.This prompt should allow execution of the RACADM utility.6. Mount the Hardware ISO to the iDRAC from the remote share:racadm -r -u root -p remoteimage -c -u -p -l ///SIORN/ScaleIO-Ready-Node-Hardware-Update-for-Dell_2.0.1.isoWhere:l is the iDRAC IP addressl is the password for the serverl is the NFS/CIFS share usernamel is the NFS/CIFS share passwordl is the NFS/CIFS server IPNoteThe default password is Scaleio123.7. Enable the iDRAC VirtualCD to boot once using these Remote RACADMcommands:racadm -r -u root -p setiDRAC.ServerBoot.BootOnce Enabledracadm -r -u root -p setiDRAC.ServerBoot.FirstBootDevice VCD-DVD8. Verify that the server is in a state in which it can be power-cycled. (The OSshould be in maintenance mode, as needed).9. Power-cycle the ScaleIO Ready Node server:racadm -r -u root -p serveractiongraceshutdownReference MaterialDell OpenManage DRAC Tools (RACADM) 69