The command output tells you whether the installation succeeded.9. Right-click the ESXi host and select Power > Reboot.10. Optionally view the information about the installed VIBs:esxcli --server software vib getorsoftware vib list11. From the iDRAC web interface, open the iDRAC settings > Overview page andensure that the iDRAC Service Module status is RunningDTK - Hardware Update Bootable ISOThe Dell OpenManage Deployment Toolkit (DTK) includes a set of utilities, samplescripts, and sample configuration files that you can use to deploy and configure theDell systems. This section provides additional information on using the ScaleIO ReadyNode Hardware Update Bootable ISO ("Hardware ISO") to update drivers, BIOS, andfirmware on ScaleIO Ready Node servers.Dell OpenManage DRAC Tools (RACADM)An integrated Dell Remote Access Controller (iDRAC) with Lifecycle Controller isembedded in every Dell PowerEdge server. The RACADM command-line utilityprovides a scriptable interface that enables you to configure the iDRAC either locallyor remotely. The utility runs on the management station and the managed system.The RACADM utility supports the following interfaces:l Local - Supports running RACADM commands from the managed server'soperating system. To run local RACADM commands, install the OpenManagesoftware on the managed server. Only one instance of Local RACADM can beexecuted on a system at a time.l SSH or Telnet (also known as Firmware RACADM) - Firmware RACADM isaccessible by logging in to iDRAC using SSH or Telnet.l Remote - Supports running RACADM commands from a remote managementstation such as a laptop or desktop running Windows or Linux. To run RemoteRACADM commands, install the DRAC Tools utility from the OpenManagesoftware on the remote computer.NoteFor information regarding RACADM commands, see the RACADM CLI Guide.Update the hardware using remote RACADMYou can install and execute the Dell RACADM tool from any management system withaccess to the iDRAC network. The remote RACADM command set is useful in thissituation to mount and execute the Hardware ISO to a large number of ScaleIO ReadyNode servers. This prevents the need for multiple web browser windows and manualkeyboard and mouse clicks for each server.Reference Material68 Hardware Configuration and Operating System Installation Guide - ESXi Servers
