Dell Edge Gateway 3003 Installation And Operation Manual

Also see for Edge Gateway 3001: Getting started guide Getting started guide Getting started guide Installation and operation manual

Contents

Dell Edge Gateway 3003 Installation And Operation Manual Manual pdf 58 page image

6Accessing and updating BIOSAccessing BIOS settingsUse Dell Command | Configure (DCC) to access BIOS settingsDell Command | Configure (DCC) is a factory-installed application in the Edge Gateway that helps to configure the BIOS settings. It consistsof a Command Line Interface (CLI) to configure various BIOS features. For more information about DCC, see www.dell.com/dellclientcommandsuitemanuals.• On the connected computer running Windows, click Start → All Programs → Command Configure → Dell Command | ConfigureWizard• On the connected computer running Ubuntu Core, access Dell Command | Configure using the command dcc.cctkFor more information on how to use the Dell Command | Configure application, see the Dell Command | ConfigureInstallation Guide andUser's Guide at www.dell.com/dellclientcommandsuitemanuals.For more information about BIOS settings on the Edge Gateway, see Default BIOS settingsUse Edge Device Manager (EDM) to access BIOS settingsEdge Device Manager (EDM) enables you to perform remote management and system configuration. By using the EDM cloud console, youcan view and configure the BIOS settings. For more information about the EDM, see www.dell.com/support/home/us/en/19/product-support/product/wyse-cloud-client-manager/research.Entering BIOS setup during POSTNOTE: These steps are applicable only to the Edge Gateway 3003.1. Connect a display, keyboard and mouse to the system.2. Power on the Edge Gateway.3. During POST, when the product logo is displayed, watch for the F2 prompt to appear, and then press F2 immediately.Updating BIOSNOTE: Download the latest BIOS file from dell.com/support/home/us/en/19/product-support/product/dell-edge-gateway-3000-series-oem-ready/drivers.Select one of these options to update the BIOS on the Edge Gateway.• Using the USB invocation scriptNOTE: It is recommended to use the USB invocation script to update the BIOS.• (Edge Gateway 3003 only) Flashing the BIOS from a USB flash drive• Updating the BIOS on a Windows system• Using UEFI capsule update on an Ubuntu system• Dell Command | Configure (DCC)• Edge Device Manager (EDM)58