Dell Force10 S2410-01-10GE-24P Quick Start Manual

Also see for Force10 S2410: Manual

Contents

8 Installing the HardwareNo portion of the back shell nor any latching mechanism on the diminutive sideof the trapezoidal CX4 connector nozzle shall extend more than 0.230 inchesfrom the connector centerline parallel to that side. No portion of the back shellnor any latching mechanism on the opposite side of the trapezoidal connectornozzle shall extend more than 0.375 inches from the connector centerlineparallel to that side. No portion of the back shell nor any latching mechanismshall extend more than 0.0495 inches from the centerline of the connectorcenterline perpendicular to the long axis of the trapezoidal nozzle.Accessing XFP PortsDell Force10 offers various types of XFP transceivers. For details, see:http://www.force10networks.com/products/specifications.aspAll ports in the S2410P use XFP transceivers except the dedicated EthernetManagement port, and the S2410CP includes four XFP ports. The XFPtransceiver (not included in the S2410 chassis shipping box) is a smallrectangular module that you insert into the port and into which you insert anoptical cable. Each XFP contains two fiber optic leads. XFPs are hot-insertableand swappable.CAUTION: Electrostatic discharge (ESD) damage can occur if componentsare mishandled. Always wear an ESD-preventive wrist or heel ground strapwhen handling the S2410 and its components.WARNING: Do not look directly into an optical port, which could result inphysical harm.