Safety Instructions 13SAFETY: Protecting Against Electrostatic DischargeStatic electricity can harm electronic components inside your computer. To prevent static damage, discharge staticelectricity from your body before you touch any of your computer’s electronic components, such as a memory module.You can do so by touching any connector on the back panel of the computer.As you continue to work inside the computer, periodically touch any connector on the back panel of the computer toremove any static charge your body may have accumulated.You can also take the following steps to prevent damage from electrostatic discharge (ESD):• When unpacking a static-sensitive component from its shipping carton, do not remove the component from theantistatic packing material until you are ready to install the component. Just before unwrapping the antistaticpackaging, be sure to discharge static electricity from your body.• When transporting a sensitive component, first place it in an antistatic container or packaging.• Handle all sensitive components in a static-safe area. If possible, use antistatic floor pads and workbench pads.SAFETY: Battery DisposalYour computer uses a lithium-ion battery and a coin-cell reserve battery. For instructions about replacingthe lithium-ion battery in your computer, see "Removing a Battery" on page 42 and "Installing a Battery" onpage 43. The reserve battery is a long-life battery, and it is very possible that you will never need to replaceit. However, should you need to replace it, see "Reserve Battery" on page 120 for instructions.Do not dispose of the battery along with household waste. Contact your local waste disposal agency for theaddress of the nearest battery deposit site.G2806bk2.book Page 13 Tuesday, May 25, 2004 8:48 AM
