Back to Contents PageUsing the Memory Card ReaderDell™ Inspiron™ 1521 Owner's ManualMemory Card BlanksInstalling a Memory CardRemoving a Memory Card or BlankThe memory card reader provides a fast and convenient way to view and share digital photos, music, and videos stored on a memory card.The 8-in-1 memory card reader reads the following memory cards:l Secure Digital (SD) memory cardl Secure Digital Input/Output (SDIO) cardl MultiMediaCard (MMC)l Memory Stickl Memory Stick PROl xD-Picture Cardl Hi Speed-SDl Hi Density-SDMemory Card BlanksYour computer shipped with a plastic blank installed in the memory card reader. Blanks protect unused slots from dust and other particles. Save the blank foruse when no media memory card is installed in the slot; blanks from other computers may not fit your computer.Remove the blank before installing a media memory card. To remove the blank, see Removing a Memory Card or Blank.Installing a Memory CardYou can install a media memory card in the computer while the computer is running. The computer automatically detects the card.Memory cards are generally marked with a symbol (such as a triangle or an arrow) or a label to indicate which end to insert into the slot. The cards are keyedto prevent incorrect insertion. If card orientation is not clear, see the documentation that came with the card.To install a memory card:1. Hold the card with the top side of the card facing up.2. Slide the card into the slot until the card is completely seated in its connector.If you encounter too much resistance, do not force the card. Check the card orientation and try again.The computer recognizes the memory card and automatically loads the appropriate device driver. If the configuration program tells you to load themanufacturer's drivers, use the media that came with the memory card, if applicable.NOTE: A memory card is not a bootable device.CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the Product Information Guide.