84 Using the Memory Card ReaderCAUTION: Before you begin any of the procedures in this section, follow thesafety instructions in the Product Information Guide.To install a memory card:1 Hold the card with the top side of the card facing up.2 Slide the card into the slot until the card is completely seated in itsconnector.If you encounter too much resistance, do not force the card. Check thecard orientation and try again.The computer recognizes the memory card and automatically loads theappropriate device driver. If the configuration program tells you to load themanufacturer's drivers, use the media that came with the memory card, ifapplicable.Removing a Memory Card or BlankCAUTION: Before you begin any of the procedures in this section, follow thesafety instructions in the Product Information Guide.NOTICE: Use the memory card configuration utility (click the icon in thenotification area) to select a card and stop it from functioning before you remove itfrom the computer. If you do not stop the card in the configuration utility, you could losedata.Press the card into the slot to release it from the card reader. When it ispartially ejected, remove the card.
