Dell Inspiron Zino HD 410 Service Manual

Boot SequenceThis feature allows you to change the boot sequence for devices.Processor L2 Cache Displays the amount of processor Level 2 cache.Memory Installed Indicates the amount of installed memory.Memory Available Indicates the amount of available memory.Memory Speed Indicates the frequency of installed memory.Memory Technology Indicates the type of installed memory.Standard CMOS FeaturesSystem Time Displays current time in the format (hh:mm:ss).System Date Displays current date in the format (mm:dd:yyyy).SATA 1 Displays the SATA drives connected to the SATA 1 connector.SATA 2 Displays the SATA drives connected to the SATA 2 connector.ESATA1 Displays the ESATA drives connected to the ESATA 1 connectorESATA2 Displays the ESATA drives connected to the ESATA 2 connectorAdvanced BIOS FeaturesCPU Feature l AMD Cool 'N' Quiet — Enabled; Disabled (Enabled by default)l Secure Virtual Machine Mode — Enabled; Disabled (Enabled by default)USB Device Setting l USB Operation Mode — HiSpeed; FullSpeed (HiSpeed by default)Advanced Chipset FeaturesOnboard Audio Controller Enabled; Disabled (Enabled by default)SATA Mode AHCTI; ATA (ATA by default)Onboard LAN Controller Enabled; Disabled (Enabled by default)Onboard LAN Boot ROM Enabled; Disabled (Disabled by default)Boot Device ConfigurationBoot SettingsConfigurationl Fast Boot — Enabled; Disabled (Enabled by default)l Numlock Key — On; Off (On by default)l Keyboard Errors — Report; Do Not Report (Report by default)Hard Disk Boot Priority Used to set the device priority of hard drives. The items displayed are dynamically updated according to the hard drivesdetected.1st Boot Device Removable Dev.; Hard Drive; CD/DVD; Network; USB; Disabled (Hard Drive by default)2nd Boot Device Removable Dev.; Hard Drive; CD/DVD; Network; USB; Disabled (USB by default)3rd Boot Device Removable Dev.; Hard Drive; CD/DVD; Network; USB; Disabled (CD/DVD by default)4th Boot Device Removable Dev.; Hard Drive; CD/DVD; Network; USB; Disabled (Removable Dev. by default)5th Boot Device Removable Dev.; Hard Drive; CD/DVD; Network; USB; Disabled (Network by default)Power Management SetupRemote Wake Up Enabled; Disabled (Enabled by default)AC Recovery Power Off; Power On; Last Power State (Power Off by default)Auto Power On Enabled; Disabled (Disabled by default)Auto Power On Date 0Auto Power On Time 0:00:00BIOS Security FeaturesSet Supervisor Password Press to set the supervisor password.User Access Level No Access; View Only; Limited; Full Access (Full Access by default)Set User Password Press to set the user password.Password Check Setup; Always (Setup by default)