Customizing System Features 2-3Figure 2-1. Main Menu of Setup ProgramDateDATE sets your system to the date you specify (usually thecurrent date). Type in the appropriate information. Use thetab key to move between the month, day, and year fields.TimeTIME sets the computer to the time you specify (usuallythe current time). Type in the appropriate information.Use the tab key to move between the hours, minutes, andseconds fields. This option is useful if you travel betweentime zones.Hard-Disk Drive 0HARD-DISK DRIVE 0 displays the capacity of the com-puter’s hard-disk drive. This option has no user-selectable settings. If you install a drive with a differentcapacity, this option changes automatically.Boot SequenceBOOT SEQUENCE determines which disk device the com-puter uses to find the software needed to start theoperating system.DISKETTE FIRST (the default) causes the computer first toattempt booting from a bootable diskette. If the computerdoes not detect a diskette in the diskette drive, the com-puter tries to boot from the hard-disk drive. If there is adiskette in the diskette drive, but the diskette does not havethe required boot files, an error message is displayed.HARD DISK ONLY causes the computer to boot only fromthe hard-disk drive. If it fails to boot from the hard-diskdrive, the computer does not attempt to boot from thediskette drive.Date: [5/01/1996]Time: [03:06:18]Hard-Disk Drive 0: C: 812 MBBoot Sequence: [Diskette First]Diskette A: 1.44 MB, 3.5”Total Memory: 8 MBVideo Memory 896 KBPhoenixBIOS Setup — Copyright 1985-95 Phoenix Technologies Ltd.Item Specific HelpMain Peripherals Security Power ExitF1 Help Select Item -/+ Change Values F9 Setup DefaultsESC Exit Select Menu Enter Select Sub-Menu F10 Previous Values
