Adding and Replacing Parts 1134 Ease the hinge cover up, moving from right to left, and remove it.5 To replace the hinge cover, insert the left edge of the cover into the hinge cover slot, and press from leftto right until the cover snaps into place.KeyboardCAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the ProductInformation Guide.NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodicallytouching an unpainted metal surface (such as a connector on the back of the computer).To remove the keyboard:1 Follow the procedures in "Before You Begin" on page 107.2 Remove the hinge cover (see "Hinge Cover" on page 112).3 Remove the three screws at the top of the keyboard.NOTICE: The keycaps on the keyboard are fragile, easily dislodged, and time-consuming to replace. Be carefulwhen removing and handling the keyboard.4 Rotate the keyboard forward and lay it on the palm rest to allow access to the keyboard connector onthe system board.1 hinge cover 2 indent12
