Dell OptiPlex 360 Service Manual

Also see for OptiPlex 360: Setup and quick reference guide Brochure & specs Technical guidebook

Contents

Dell OptiPlex 360 Service Manual Manual pdf 57 page image

Drives 57The SATA interface connectors are keyed for correct insertion; that is, a notchor a missing pin on one connector matches a tab or a filled-in hole on theother connector.Optical DriveRemoving an Optical Drive From the Mini Tower Computer1 Follow the procedure in "Before Working on Your Computer" on page 9.2 Remove the computer cover (see "Removing the Mini Tower ComputerCover" on page 19).3 Remove the drive bezel (see "Removing the Drive Bezel" on page 25).4 Disconnect the optical drive data cable from the system board connector.5 Disconnect the power cable and the optical drive data cable from the backof the drive.6 Remove the screw securing the optical drive to the optical drive bay.7 Slide the optical drive out through the front of the computer.8 If you are removing the drive permanently:a Install the drive panel insert (see "Installing an Optical Drive PanelInsert" on page 59).