Dell OptiPlex 960 Service Manual

Also see for OptiPlex 960: Configuration guide Technical guidebook Setup and quick reference guide Setup and features information Technical specifications

Power Cable ConnectorsConnecting and Disconnecting Drive CablesWhen removing an cable with a pull-tab, grasp the colored pull-tab and pull until the connector detaches.When connecting and disconnecting a SATA data cable, hold the cable by the black connector at each end.Removing Drive Bay InsertsIf you are installing a new drive:1. Perform the procedure Before Working on Your Computer.2. Press the insert retention tab on the inside of the bezel to release the drive bay insert. Remove the drive bay insert from the front of the bezel.1 data interface cable connector 2 SATA interface connector1 power cable 2 power input connector1 retention tab 2 drive bay insert