Jumper SettingsThe jumper locations are shown below.Back to Contents Page4 memory module connectors (DIMM_1, DIMM_2, DIMM_3, DIMM_4) 15 PCI Express x1 connector (SLOT4)5 serial ATA drive connectors (SATA0, SATA2, SATA1, SATA3) 16 PCI connector (SLOT2)6 front-panel connector (FNT_PANEL) 17 PCI connector (SLOT3)7 CD drive analog audio cable connector for optional analog audio cable (CD_IN) 18 serial connector (SER2)8 power connector (POWER) 19 floppy drive connector (DSKT)9 CD/DVD drive connector (IDE) 20 standby power indicator (AUX_PWR)10 RTC reset jumper (RTCRST) 21 system board speaker (BEEP)11 intrusion switch connector (INTRUDER) 22 internal speaker (INT_SPKR)Mini Tower ComputerJumper Setting DescriptionPSWD Password features are enabled (default).Password features are disabled.RTCRST Real-time clock has not been reset (default).Resetting Real-time clock (jumpered temporarily).jumpered unjumpered
