Back to Contents PageDell™ OptiPlex™ GX620User's GuideRemoving the Computer CoverRemoving the Computer Cover1. Follow the procedures in "Before You Begin."2. Lay the computer on its side as shown in the illustration.3. Locate the cover release latch shown in the illustration. Then, slide the release latch back as you lift the cover.4. Grip the sides of the computer cover and pivot the cover up using the hinge tabs as leverage points.5. Remove the cover from the hinge tabs and set it aside on a soft nonabrasive surface.Back to Contents PageCAUTION: Before you begin any of the procedures in this section, follow the safety instructions located in the Product Information Guide.CAUTION: To guard against electrical shock, always unplug your computer from the electrical outlet before removing the computer cover.1 security cable slot2 cover release latch3 padlock ring
