Viewing Hardware Logs Using CMC Web InterfaceYou can view, save, and clear the hardware log. You can sort the log entries based on Severity, Date/Time, orDescription by clicking the column heading. Subsequent clicks on the column headings reverse the sort.To view the hardware logs using CMC Web interface, in the system tree, go to Chassis Overview and click Logs āHardware Log . The Hardware Log page is displayed. To save a copy of the hardware log to your managed station ornetwork, click Save Log and then specify a location for a text file of the log.NOTE: Since the log is saved as a text file, the graphical images used to indicate severity in the user interface donot appear. In the text file, severity is indicated with the words OK, Informational, Unknown, Warning, and Severe.The date and time entries appear in ascending order. If appears in the Date/Time column, itmeans that the event occurred during shut down or start up of any of the modules, when no date or time isavailable.To clear the hardware log, click Clear Log.NOTE: CMC creates a new log entry indicating that the log was cleared.Viewing Hardware Logs Using RACADMTo view the hardware log using RACADM, open a serial/Telnet/SSH text console to CMC, log in, and type:racadm getselTo clear the hardware log, type:racadm clrselViewing CMC LogCMC generates a log of the chassis-related events.NOTE: To clear the CMC log, you must have Clear Logs Administrator privilege.Related LinksViewing Event LogsViewing CMC Logs Using the Web InterfaceYou can view, save, and clear the CMC log. You can sort the log entries based on Source, Date/Time, or Description byclicking the column heading. Subsequent clicks on the column headings reverse the sort.To view the CMC log using the CMC Web interface, in the system tree, go to Chassis Overview and click Logs ā CMCLog. The CMC Log page is displayed.To save a copy of the CMC log to your managed station or network, click Save Log and then specify a location save thelog file.Viewing CMC Logs Using RACADMTo view the CMC log information using RACADM, open a serial, Telnet, SSH text console to CMC, log in, and type:racadm getraclogTo clear the hardware log, type:racadm clrraclog205
