44 Dell PowerConnect 28xx Systems User GuideWizard Step 4The following information displays:Finally, setup the default gateway.Please enter the IP address of the gateway from which this network isreachable(e.g. 192.168.1.1).Default gateway (A.B.C.D):[10.6.22.97]Enter the default gateway.Press Enter. The following is displayed (as per the example parameters described):This is the configuration information that has been collected:==============================================================SNMP Interface = Dell_Network_Manager@0.0.0.0User Account setup = adminPassword = **********Management IP address = 10.6.22.100 255.255.255.224Default Gateway is 10.6.22.97==============================================================Wizard Step 5The following information displays:If the information is correct, please select (Y) to save theconfiguration, and copy to the start-up configuration file. If theinformation is incorrect,select (N) to discard configuration andrestart the wizard: (Y/N)[Y] YConfiguring SNMP management interface.Configuring user account.......Configuring IP and subnet......Thank you for using Dell Easy Setup Wizard.Advanced ConfigurationThis section provides information about dynamic allocation of IP addresses.When configuring/receiving IP addresses through DHCP, the configuration received from the serverincludes the IP address, and may include subnet mask and default gateway.
