46 Dell PowerConnect 28xx Systems User GuideProcessor: FireFox 88E6218 ARM946E-S , 64 MByte SDRAM.I-Cache 8 KB. D-Cache 8 KB. Cache Enabled.Autoboot in 2 seconds - press RETURN or Esc. to abort and enter prom.Preparing to decompress...2 When the auto-boot message appears, press to get the Startup menu. The Startup menuprocedures can be done using the ASCII terminal or Windows HyperTerminal.[1] Download Software[2] Erase Flash File[3] Password Recovery Procedure[4] Enter Diagnostic Mode[5] Set Terminal Baud-Rate[6] BackEnter your choice or press 'ESC' to exitThe following sections describe the available Startup menu options.NOTE: When selecting an option form the Startup menu, time out must be taken into account: if no selection ismade within 35 seconds (default), the device times out. This default value can be changed through CLI.Software DownloadThe software download procedure is performed when a new version must be downloaded to replace thecorrupted files, update or upgrade the system software. To download software from the Startup menu:1 From the Startup menu, press [1]. The following prompt appears:Downloading code using XMODEM2 When using the HyperTerminal, click Transfer on the HyperTerminal Menu Bar.3 In the Filename field, enter the file path for the file to be downloaded.4 Ensure that the Xmodem protocol is selected in the Protocol field.5 Press Send. The software is downloaded.NOTE: After software download, the device reboots automatically.NOTE: The length of time taken by the download varies according to the tool used.Erase FLASH FileIn some cases, the device configuration must be erased. If the configuration is erased, all parametersconfigured via CLI, EWS or SNMP must be reconfigured.
