Update with your book title 89Manually Allocating IP Addresses (Static Hosts)The Static Hosts page is used to manually allocate IP addresses to network hosts. To open the StaticHosts page, click System → DHCP Server → Static Hosts in the tree view.Figure 6-28. Static Hosts• Host Name — Indicates the host pool name, which can be a string of symbols and an integer (forexample, piy4). The range is up to 32 characters.• IP Address — Specifies the IP address that was statically assigned to the host.• Network Mask — Specifies the pool’s network mask.• Prefix Length — Specifies the number of bits that comprise the address prefix.• Client Identifier — A unique identification of the client specified in dotted hexadecimal notation,e.g., 01b6.0819.6811.72.• MAC Address — Specifies the MAC Address of DHCP static host.• Client Name — Specifies the name of the client, using a standard set of ASCII characters. The clientname must not include the domain name. The range is up to 32 characters.• Default Router — Specifies the default router for the DHCP static host.• Domain Name Server — Specifies the DNS server available to the DHCP client.• Domain Name — Specifies the domain name for a DHCP static host. The domain name may containup to 32 characters.
