64 Update with your book titleDefining Device IP AddressesThe IP Addressing page contains links for assigning interface and default gateway IP addresses, andenabling or disabling DHCP.To open the IP Addressing page, click System → IP Addressing in the tree view.Defining IP Interface ParametersThe IP Interface Parameters page is used to select whether the device IP address, mask and/or gateway isassigned statically, or dynamically using DHCP. The page is also used to make static assignments, and toapprove dynamic assignments received from the DHCP server before they go into affect (until approval,the old address is used).To open the IP Interface Parameters page, click System→ IP Addressing → IP Interface Parameters inthe tree view.Figure 6-6. IP Interface Parameters• DHCP — The DHCP client can be enabled to acquire the network configuration dynamically. TheDHCP default value is Disable. This field enables the DHCP client.• IP Address — Specifies the static IP Address currently assigned to the device.• Subnet Mask— Specifies the subnet mask of the static IP Address, currently assigned to the device.• Default Gateway — Specifies the static Default Gateway Address, currently assigned to the device.• DHCP IP Address — Specifies the IP Address received from the DHCP server.• DHCP Subnet Mask — Specifies the Subnet Mask received from the DHCP server.
