Command Groups 25Configuration and Image Files Commandssntp authenticate Grants authentication for received NetworkTime Protocol (NTP) traffic from servers.GlobalConfigurationsntp trusted-key Authenticates the identity of a system to whichSimple Network Time Protocol (SNTP) willsynchronize.GlobalConfigurationsntp client poll timer Sets the polling time for the Simple NetworkTime Protocol (SNTP) client.GlobalConfigurationsntp broadcast clientenableEnables the Simple Network Time Protocol(SNTP) broadcast clients.GlobalConfigurationsntp anycast client enable Enables Anycast clients. GlobalConfigurationsntp client enable(interface)Enables the Simple Network Time Protocol(SNTP) client on an interface.InterfaceConfigurationsntp unicast client enable Enables the device to use the Simple NetworkTime Protocol (SNTP) to request and acceptNetwork Time Protocol (NTP) traffic fromservers.GlobalConfigurationsntp unicast client poll Enables polling for the Simple Network TimeProtocol (SNTP) predefined unicast clients.GlobalConfigurationsntp server Configures the device to use the SimpleNetwork Time Protocol (SNTP) to request andaccept Network Time Protocol (NTP) trafficfrom a server.GlobalConfigurationshow clock Displays the time and date from the systemclock.User EXECshow sntp configuration Shows the configuration of the Simple NetworkTime Protocol (SNTP).Privileged UserEXECshow sntp status Shows the status of the Simple Network TimeProtocol (SNTP).Privileged UserEXECCommand Group Description Access Modedelete startup-config Deletes the startup-config file. Privileged UserEXECcopy Copies files from a source to a destination. Privileged UserEXECboot system Specifies the system image that the device loads atstartup.Privileged UserEXEC
