Command Modes 51MA (Management Access-level) ModePE (Privileged User EXEC) Modehistory size Changes the command history buffer size for a particular line.password Specifies a password on a line.autobaud Sets the line for automatic baud rate detectionspeed Sets the line baud rate.Command Descriptiondeny (management) Defines a deny rule.permit (management) Defines a permit rule.Command Descriptionshow dot1x users Displays 802.1X statistics for the specified interface.boot system Specifies the system image that the device loads at startup.clear arp-cache Deletes all dynamic entries from the ARP cache.clear bridge Removes any learned entries from the forwarding database.clear gvrp statistics Clears all the GVRP statistics information.clear host Deletes entries from the host name-to-address cacheclear host dhcp Deletes entries from the host name-to-address mapping received fromDynamic Host Configuration Protocol (DHCP).clear logging Clears messages from the internal logging buffer.clear logging file Clears messages from the logging fileclear spanning-tree detected-protocolsRestarts the protocol migration process on all interfaces or on thespecified interface.clock set Manually sets the system clock.configure Enters the global configuration mode.copy Copies files from a source to a destination.crypto certificate request Generates and displays certificate requests for HTTPS.dot1x re-authenticate Manually initiates a re-authentication of all 802.1X-enabled ports or thespecified 802.1X-enabled port.login Returns to User EXEC mode.reload Reloads the operating system.
