34 Command Groupsw w w . d e l l . c o m | s u p p o r t . d e l l . c o m RMON CommandsSNMP CommandsCommand Group Description Modeshow rmon statistics Displays RMON Ethernet Statistics. User EXECrmon collection history Enables a Remote Monitoring (RMON) MIB historystatistics group on an interface.InterfaceConfigurationshow rmon collectionhistoryDisplays the requested history group configuration. User EXECshow rmon history Displays RMON Ethernet Statistics history. User EXECrmon alarm Configures alarm conditions. GlobalConfigurationshow rmon alarm-table Displays the alarms summary table. User EXECshow rmon alarm Displays alarm configurations. User EXECrmon event Configures a RMON event. GlobalConfigurationshow rmon events Displays the RMON event table. User EXECshow rmon log Displays the RMON logging table. User EXECrmon table-size Configures the maximum RMON tables sizes. GlobalConfigurationCommand Group Description Access Modesnmp-server community Sets up the community access string to permit accessto SNMP protocol.GlobalConfigurationsnmp-server view Creates or update a view entry, GlobalConfigurationsnmp-server filter Create or update a filter entry, GlobalConfigurationsnmp-server contact Sets up a system contact. GlobalConfigurationsnmp-server location Sets up the information on where the device is located. GlobalConfigurationsnmp-server enable traps Enables the switch to send SNMP traps or SNMPnotifications.GlobalConfigurationsnmp-server trapauthenticationEnables the switch to send Simple NetworkManagement Protocol traps when authenticationfailed.GlobalConfiguration
