Dell PowerConnect 5324 Release Note

Also see for 5324 - PowerConnect Switch: User guide addendum Command line interface reference manual User guide

Dell PowerConnect 5324 Release Note Manual pdf 12 page image

PowerConnect 5324 Release NotesSystem Firmware Version 2.0.0.39 Subject to Change Without Notice Page 8Port MirroringDefining Port Mirroring SessionsAdd the following restriction:A maximum of 8 ports can be monitored (both Rx and Tx).Protocol PortModify the field name from VLAN ID (1-4095) to VLAN ID and add to the description (Range: 1-4094).Configuring GVRPDelete: To ensure the correct operation of the GVRP protocol, it is advised to set the maximum number of GVRPVLANs equal to a value which significantly exceeds the sum of:• The number of all static VLANs both currently configured and expected to be configured.• The number of all dynamic VLANs participating in GVRP, both currently configured (initial number of dynamicGVRP VLANs is 128) and expected to be configured.RMON History ControlAfter the field Max No. of Samples to Keep (1-65535) add the following note:Note: A change to the number of sample is only effective after a reboot.Viewing TablesCurrent NewThe Utilization Summary page containsstatistics for interface utilization.The Utilization Summary page containsstatistics for viewing interface utilization. GVRP StatisticsField Current NewLeave All Device GVRP Leave all statistics. Device GVRP Leave All statistics.QoSQoS OverviewUnder the WRR description, change the following:Current NewThe strict priority queue is emptied beforethe traffic in the remaining queues inforwarded.The strict priority (SP) has priority over WRR, and where thetraffic is low, WRR shares the bandwidth with SP, occupyingthe remaining bandwidth according to the calculated ratio.