Dell PowerConnect 5324 Release Note

Also see for 5324 - PowerConnect Switch: User guide addendum Command line interface reference manual User guide

Dell PowerConnect 5324 Release Note Manual pdf 19 page image

PowerConnect 5324 Release NotesSystem Firmware Version 2.0.0.39 Subject to Change Without Notice Page 15sntp broadcast client enableUpdate the command as follows:Field Current Guide Change to:Dedscription To disable the SNTP anycast client, usethe no form of this command.To disable the anycast client, use the no form ofthis command.MdixUpdate the command as follows:Field Current Guide Change to:SyntaxParameteron—Manual mdix on—Enable mdi/mdixport storm-control broadcast enableUpdate the command as follows:Field Current Guide Change to:SyntaxParameterport storm-control broadcast enableno port storm-control broadcast enableport storm-control broadcast enable[ethernetinterface]no port storm-control broadcast enable♦ interface—A valid Ethernet port.port storm-control broadcast rateUpdate the command as follows:Field Current Guide Change to:SyntaxParameterrate—Maximum kilobytes per second ofbroadcast and multicast traffic on a port.(Rate: 0 - 1488095)♦ rate—Maximum kilobytes per second ofbroadcast and multicast traffic on a port.(Rate: 0 – 65535)UserGuidelinesThe granularity is 1 - 64K packets. Notethat if the rate is 0, broadcast packets arenot forwarded.Delete this guideline.Example console(config-if)# port storm-controlbroadcast rate 10console(config)# port storm-control broadcastrate 10