Dell PowerConnect J-EX8208 Hardware Manual

Also see for PowerConnect J-8208: Quick start guide Release note Release note

Contents

Dell PowerConnect J-EX8208 Hardware Manual Manual pdf 120 page image

Figure 45: Installing a J-EX8208 Switch in a Four-Post RackRelatedDocumentationConnecting AC Power to a J-EX8200 Switch on page 130•• Rack Requirements for a J-EX8208 Switch on page 63• Cabinet Requirements and Specifications for a J-EX8208 Switch on page 66Mounting a J-EX8208 Switch on a Rack or Cabinet Using a Mechanical LiftBecause of the switch's size and weight, we strongly recommend using a mechanical liftto install the switch.NOTE: For instructions on installing a switch without using a mechanical lift,see “Mounting a J-EX8208 Switch on a Rack or Cabinet Without Using aMechanical Lift” on page 107.CAUTION: Do not install line cards in the chassis until after you mount thechassis securely on a rack or cabinet.CAUTION: Before front-mounting the switch on a rack or cabinet, have aqualified technician verify that the rack or cabinet is strong enough to supportthe switch's weight and is adequately supported at the installation site.Before you install the switch:• Prepare the site for installation as described in “Site Preparation Checklist for aJ-EX8200 Switch” on page 57.• Ensure the site has adequate clearance for both airflow and hardware maintenanceas described in “Clearance Requirements for Airflow and Hardware Maintenance fora J-EX8208 Switch” on page 67.104Dell PowerConnect J-Series J-EX8208 Ethernet Switch Hardware Guide