CHAPTER 14Maintaining the J-SRX100 ServicesGateway Hardware ComponentsThis chapter describes how to maintain the hardware components of the J-SRX100Services Gateway. This chapter includes the following section:• Maintaining the J-SRX100 Services Gateway Hardware Components on page 85Maintaining the J-SRX100 Services Gateway Hardware ComponentsTable 29 on page 85 describes the common tasks for maintaining the hardwarecomponents of the services gateway.Table 29: Maintenance Procedures for the J-SRX100 Services GatewayHardware ComponentsDescriptionMaintenanceProceduresFor optimum performance of the services gateway, you should regularlyperform the following preventive maintenance procedures :• Inspect the installation site for moisture, loose wires or cables, andexcessive dust.• Make sure that airflow is unobstructed around the device and into theair intake vents.Routine maintenanceTo maintain the power supply on the services gateway:• Make sure that the power and grounding cables are arranged so thatthey do not obstruct access to other device components.• Periodically inspect the site to ensure that the grounding and powercables connected to the device are securely in place and that there isno moisture accumulating near the device.CAUTION: We recommend using a surge protector for the powerconnection.Maintaining thepower supplyRelatedDocumentation• Site Preparation Checklist for the J-SRX100 Services Gateway on page 19• Monitoring the J-SRX100 Services Gateway Chassis Using the CLI on page 8785
